Abstract

An investigation of the feasibility of using a high-addressability inkjet printer as an alternative to the traditional proofing systems, such as Kodak Approval, was completed. The inkjet proofs must match the press sheet in terms of color, screening, screen angle, screen ruling, and screen dot size. The relatively low cost per print and the ability to incorporate color management makes inkjet technology a potential candidate also for use as a proofer for these requirements. Existing software and patents on halftone inkjet proofing were analyzed. A test form was designed to test the proofing models for screening, screen angle, and screen ruling observed in the proofs. Several workflow models were developed to generate proofs that matched the press sheet in color and moiré. Solutions for the encountered problems were tested until, finally, an optimized model was obtained that was capable of generating halftone inkjet proofs matching the press sheet visually in terms of color and moiré. This model is simple, cost effective and does not require any special software. However it is limited by the constraints of file size of Photoshop.

Library of Congress Subject Headings

Ink-jet printing; Proofs (Printing)--Evaluation; Color printing--Quality control--Research

Publication Date

6-1-2009

Document Type

Thesis

Department, Program, or Center

School of Print Media (CIAS)

Advisor

Sigg, Franz

Comments

Note: imported from RIT’s Digital Media Library running on DSpace to RIT Scholar Works. Physical copy available through RIT's The Wallace Library at: Z252.5.I48 K37 2009

Campus

RIT – Main Campus

Download

Share

COinS