Follow

Documents from 2010

PDF

Exploration of the effect of surface roughness on heat transfer in microscale liquid flow, Nicholas M. Schneider

PDF

Dynamic modeling and characterization of a wind turbine system leading to controls development, Greg Semrau

PDF

Characterization of two-phase flow in a transparent PEM fuel cell using simultaneous anode and cathode visualization and digital image processing, Jacqueline Sergi

PDF

Characterization and sensitivity analysis of hyperelastic materials in biaxial tension, Lowell Smoger

PDF

Locomotion of circular robots with diametrically translating legs: Design, analysis, and fabrication, Eric R. Steffan

PDF

Comparison of particle deposition for realistic adult and adolescent upper airway geometries using unsteady computational fluid dynamics, Jonathan Steffens

PDF

Effects of structured roughness on fluid flow at the microscale level, Rebecca Noelani Wagner

Documents from 2009

PDF

Aortic valve performance with transaortic ventricular cannula, James Cezo

PDF

Sliding mode control applied to an underactuated fuel cell system, Daniel C. DiFiore

PDF

Propellant tank pressurization modeling for a hybrid rocket, Margaret Mary Fernandez

PDF

Determination of 3-dimensional deformations of the alveolar sac during simulated breathing, Joseph M. Ferrara

PDF

Shear Stress Distribution and Hemolysis Measurements in a Centrifugal Blood Pump, Matthew Nicholson Giarra

PDF

Feasibility assessment of a Kalman filter approach to fault detection and fault-tolerance in a highly unstable system: The RIT heart pump, Erin Gillespie

PDF

Control of a magnetically levitated ventricular assist device, Arnold David Gomez

PDF

Development of a novel method for autonomous navigation and landing of unmanned aerial vehicles, David Grymin

PDF

Characterization of mass transport processes to enable PEM fuel cell start-up from low temperatures, Daniel I. Harris

PDF

Computational analysis of ultraviolet reactors, Xiang Li

PDF

Modeling and control of an automotive fuel cell thermal system, John Nolan

PDF

Modeling problems in mucus viscoelasticity and mucociliary clearance, Michael M. Norton

PDF

Thermal conductivity measurement of gas diffusion layer used in PEMFC, Arjun Radhakrishnan

PDF

Investigation and development of advanced models of thermoelectric generators for power generation applications, Emil Sandoz-Rosado

PDF

Dynamic modeling and analysis of multiple SOFC system configurations, Andrew J. Slippey

PDF

An investigation into the viability of heat sources for thermoelectric power generation systems, Kevin D. Smith

PDF

Alkali activated aerogels, Forrest R. Svingala

PDF

Investigation of tetrahedron elements using automatic meshing in finite element analysis, Gordon Bae-Ji Tseng

Documents from 2008

PDF

Experimental investigation on the effects of surface roughness on microscale liquid flow, Tim Brackbill

PDF

Evaluation of a numerical thrombosis model for a high shear rotating flow, Carlos Cheek

PDF

Shared-Sensing and Control Using Reversible Transducers, Tuhin Das and Ranjan Mukherjee

PDF

Design and analysis of rocket nozzle contours for launching Pico-Satellites, Brandon Lee Denton

PDF

Effects of complex vessel geometries on neutrophil margination and adhesion in post-capillary venules, Josa A. Hanzlik

PDF

Estimation and control of the pump pressure rise and flow from intrinsic parameters for a magnetically-levitated axial blood pump, Aditi Khare

PDF

On the determination of the elastic properties of geopolymeric materials using non-destructive ultrasonic techniques, Joseph L. Lawson

PDF

Statistical model prediction of fatigue life for diffusion bonded Inconel 600, Timothy Nowicki

PDF

Flow field analysis in an expanding healthy and emphysematous alveolar model using particle image velocimetry, Jessica Oakes

PDF

The viability of a thermoelectric fuel conditioning system for a diesel engine utilizing biodiesel, Timothy Schriefer

PDF

Robust longitudinal rate gyro bias estimation for reliable pitch attitude observation through utilization of a displaced accelerometer array, Ryan Weisman

Documents from 2007

PDF

Experimental and numerical evaluation of single phase adiabatic flows in plain and enhanced microchannels, Akhilesh V. Bapat

PDF

Development of Integrated Project Tracks for a College-Wide Multidisciplinary Engineering Design Program at RIT, Marcos Esterman, Dorin Patru, Vincent Amuso, Edward Hensel, and Mark Smith

PDF

Information flow between tools early in the engineering design process, Kate Nordland

PDF

Effects of Freezing and Thawing on the Structures of Porous Gas Diffusion Media in PEM Fuel Cells, Joaquin A. Pelaez

PDF

Dynamic inversion of underactuated systems via squaring transformation matrix, Ryan Schkoda

PDF

Mechanical fatigue in a magnetically levitated axial blood pump, Amy Slevar

PDF

A reverse engineering process for mechanical engineering systems, Frank Tamarez-Gomez

PDF

Exploration of a hybrid locomotion robot, Jeffrey Webb

PDF

Development of a ground truth simulator and application of a generalized multiple-model adaptive estimation approach to tune a state estimation filter, Kevin Wyffels

Documents from 2006

PDF

Dynamics and control of Tethered Satellite System, Royce L. Abel

PDF

Experimental Measurement of Photoresist Modulation Curves, Anatoly Bourov, Stewart Robertson, Bruce W. Smith, Michael Slocum, and Emil C. Piscani

PDF

Resist Process Window Characterization for the 45-nm Node Using an Interferometric Immersion microstepper, Anatoly Bourov, Stewart Robertson, Bruce W. Smith, Michael Slocum, and Emil C. Piscani

PDF

Thermal Characterization and Parametric Optimization of a Thermal Bimorph for use in Mirco-Robotics Applications, Owen E. Brown

PDF

Development and Test of a Kinematical Method for Estimating Rotation Using the Acceleration of a Rigid Body, Douglas A. Carr

PDF

Effects of Beam Pointing Instability on Two-Beam Interferometric Lithography, Yongfa Fan, Anatoly Bourov, Michael Slocum, and Bruce W. Smith

PDF

Advanced Thermodynamic Analyses of Energy Intensive Building Mechanical Systems, Erin N. George

PDF

Computational fluid dynamics and experimental studies of an energy-efficient UV disinfection system for water treatment, Nancy Goenawan

PDF

Modification of a longitudinal load cell balance and an experimental study of winglet effects on stall for application to Micro Air Vehicles, Aaron J. Grilly

PDF

Microelectronic engineering education for emerging frontiers, Santosh Kurinec, Dale Ewbank, Lynn Fuller, and Karl Hirschman

PDF

Analysis of tensioner induced coupling in serpentine belt drive systems, Ryan Neward

PDF

Health Monitoring of LAV Planet Gear Bushings using Signature Analysis Techniques, Victoria L. Parnell

PDF

Dynamic Analysis of Hollow Tapered Isotropic and Composite Shafts Using Finite Element Techniques, Lindsay LaRocca Parslow

PDF

The Design of a small satellite launch system - a multidisciplinary capstone experience, Dorin Patru, Jeffrey Kozak, and Robert Bowman

PDF

Thin/cambered/reflexed airfoil development for micro-air vehicles at Reynolds numbers of 60,000 to 150,000, Michael Reid

PDF

Plane Elasticity Using Airy Stress Functions, Matthew David Roman

PDF

H-Infinity Controller Design for Structural Damping, Darren Rowen and Mark A. Hopkins

PDF

Evaluation of a Dual Chamber Vortex Generator for a lithium bromide-water absorption refrigeration system, Lee Skolnik

PDF

Evanescent Eave Imaging in Optical Lithograpy, Bruce W. Smith, Yongfa Fan, Jianming Zhou, Neal Lafferty, and Andrew Estroff

PDF

Preliminary finite element modeling of a piezoelectric actuated marine propulsion fin, Andrew Streett

PDF

Three-Dimensional Imaging of 30-nm Nanospheres Using Immersion Interferometric Lithography, Jianming Zhou, Yongfa Fan, and Bruce W. Smith

Documents from 2005

PDF

Inversion Ranks for Lossless Compression of Color Palette Images, Ziya Arnavut and Ferat Sahin

PDF

Experimental study of water transport mechanisms and two-phase pressure drop in a simulated polymer electrolyte membrane fuel cell cathode gas channel, John Borrelli

PDF

Proposed exergetic based leak detection and diagnosis methodology for automotive carbon dioxide air conditioning systems, Erin Canfield

PDF

A Quantitative Assessment of the Benefit of a Learning Community Environment, Mario H. Castro-Cedeno

PDF

Modeling of diesel particulate emissions aftertreatment system using non-thermal plasma, Cheng Chen

PDF

Deposition of inhaled particles in a symptomatic asthmatic human respiratory tract, John N. DiFlorio

PDF

An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels, Nathan J. English

PDF

Utilizing neural networks to proactively monitor energy usage in City of Rochester buildings, Brian J. Gillis

PDF

Free vibration of sandwich plates with viscoelastic cores, Devlin Hayduke

PDF

Hybrid Multivariable Controller Architecture, Mark A. Hopkins, David Smith, Phillip Vallone, and Richard Sandor

PDF

Characterization of Surface Roughness Effects on Pressure Drop in Single-Phase Flow in Minichannels, Satish G. Kandlikar, Derek Schmitt, Andres L. Carrano, and James B. Taylor

PDF

Deployment Experiments for Ballooning on Mars (DEBOM), Aimee Nicolette Lemieux

PDF

An Evaluation Of A Multigrid Algorithm Error Spike Correction Method, Erika L. McMichael

PDF

Investigation of a coupled duffing oscillator system in a varying potential field, Joseph Patrick O'Day

PDF

High temperature effect of geopolymeric coatings on concretes, Natalya Privorotskaya

PDF

Modification of a longitudinal wind tunnel balance for identification of Micro Air Vehicle instabilities, Joshua A. Shreve

PDF

25nm Immersion Lithography at a 193nm Wavelength, Bruce W. Smith, Yongfa Fan, Michael Slocum, and Lena Zavyalova

PDF

Evaluation of Numerical, Analytical, and Experimental Particle Deposition in Simple and Lung Geometries, Pamela M. Snyder

PDF

Analytical Investigations of Modified Active Remote Dynamic Vibration Absorbers, Piyes SrungBoonmee

PDF

Application of Particle Swarm Techniques in Sensor Network Configuration, Jason C. Tillett, Shanchieh Jay Yang, Raghuveer Rao, and Ferat Sahin

PDF

Darwinian particle swarm optimization, Jason Tillett, T. Rao, Ferat Sahin, and Raghuveer Rao

PDF

Dynamic characteristics of a hyperboloid shell of revolution with application to flexible couplings, Brian G. Towner

PDF

Experimental and Theoretical Study of a UV Disinfection System for Water Treatment, Wei Yang

Documents from 2004

PDF

CFD analysis and validation for solution to micro air vehicle airframes, Taher I. Attari

PDF

Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels, Prabhu Balasubramanian

PDF

Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics, Lisa M. Barrett

PDF

Photoresist Modulation Curves, Anatoly Bourov, Yongfa Fan, Frank C. Cropanese, and Bruce W. Smith

PDF

Immersion Microlithography at 193 nm with a Talbot Prism Interferometer, Anatoly Bourov, Yongfa Fan, Frank Cropanese, Neal Lafferty, Lena V. Zavyalova, Hoyoung Kang, and Bruce W. Smith

PDF

Synthetic Defocus for Interferometric Lithography, Frank C. Cropanese, Anatoly Bourov, Yongfa Fan, Jianming Zhou, Lena Zayalova, and Bruce W. Smith

PDF

Design and Simulation of a MEMS Long Distance Traveling Micro-Actuator, Younes Elkacimi

PDF

ILSim: A Compact Simulation Tool for Interferometric Lithography, Yongfa Fan, Anatoly Bourov, Lena Zavyalova, Jianming Zhou, Andrew Estroff, and Bruce W. Smith

PDF

Study of Air Bubble Induced Light Scattering Effect On Image Quality in 193 nm Immersion Lithography, Yongfa Fan, Neal V. Lafferty, Anatoly Bourov, Lena Zavyalova, and Bruce W. Smith

PDF

Design of a Two-Sensor Camera for Near-Finfrared Aeiral Remote Sensing, Sergio O. Guevara

PDF

Design, fabrication, and testing of a miniature impulse turbine driven by compressed gas, Daniel B. Holt